Alarms are installed to enhance the security of the driver and the vehicle itself, making it one of the most important components of your car. It does not only help to prevent car theft, it also can dismiss any unwarranted attempts to access your car, as well as your belongings. However, there are times that the alarm goes off for no reason, causing the loud, noisy, and annoying sound.
In this post, we are going to discuss the steps on how to turn off a car alarm. We are also going to talk about some of the reasons why your car alarm keeps going off. You might think that you would need professional help but the truth is that you can successfully accomplish this task on your own and you will only be using the basic materials. Read on if you want to know more.
Why Does you Car Alarm Keep Going On
If your car’s alarm won’t shut off, it may be because of one of these reasons:
1. Malfunctioning Key Fob
In case you are not familiar, a key fob is the plastic controller that can lock and unlock your car’s door, as well as shut off the alarm. However, if the key fob is malfunctioning, it will not be able to send the proper signal into the car’s alarm system, which results in the alarm going on and off.
2. Poor Connection of the Hood Latch
The hood latch might set off false alarms just because the sensors are not responding properly to the given commands. This is the reason why your car alarm seems to go off even after you have the hood latch sensors cleaned. It should also be noted that this issue can also cause trouble to the control unit, which can result in incorrect readings to the signals.
3. Rust Battery Terminals
Another reason why your car alarm keeps going off is that the terminals are already worn out. If this happens, the battery will not be able to supply enough power to the different car components. With this, the sensor might interpret this condition as the car having low battery and it might go off to tell you about it.
4. Low Battery
One of the main functions of the car alarm system is to warn you that the battery levels are low. You will notice that if you try to turn the engine on with a low or already dying battery, the alarm will set off. To check the battery, you may try using a voltmeter. If the reading shows less than 12.6V, it might be the best time to replace the battery.
5. Hood Latch Sensor is Dirty
In case you did not know, the hoot latch sensor collects grime and grease, which results in malfunctioning. In the event the hood latch sensor is malfunctioning, it often triggers the alarm to go off. As well all know, this sensor is what protects your car from damage, theft, and the unintentional opening of the hood. This is the main reason why you should always have your hood latch sensor cleaned, as it enhances the car safety.
Steps on How to Turn Off a Car Alarm
In this section, we are going to discuss the step-by-step instructions on how to turn off a car alarm. You do not need professional help, all you need are the right materials to successfully accomplish this job, which includes the following:
- Owner’s manual
- Fuse pulling tool
- Needle nose pliers
1. Be Familiar with the Alarm
When your car’s alarm goes off, it might not be the best time to begin reading the owner’s manual. In most cases, however, the user causes this problem. For you to be able to do this task effectively even before it happens, take time to read the manual and make sure that you are following the correct procedures on how to turn off a car alarm.
2. Start the Car
To start your car, put the key in the ignition. Both aftermarket system alarms and factory-installed alarms normally shut off once the car is started.
3. Unlock the Driver’s Door Using your Key
Using your key to unlock the driver’s door usually shuts off and resets the alarm. However, in case the driver’s door has already been unlocked, try to lock and then unlock it again. Doing this should solve the problem.
4. Try to Pull the Fuse
Before doing this step, you need to locate the fuse box first. This is usually located on the left-hand side of the steering column. To add, they usually have a fuse diagram that you can find on the lid of the fuse box. Most fuses do have a label on them. However, if the fuse does not have a label, you might need to consult your owner’s manual to locate the alarm fuse.
Pull the fuse. The alarm would turn off if you have pulled the correct fuse. However, if the alarm did not turn off, you need to reinstall the use and try pulling it again until you find the correct fuse. If you have successfully turned off the alarm, you need to reinstall the fuse to see if this step resets the alarm system. It should be noted that if the car alarm starts acting up again, you need to bring it to a professional to have it repaired.
5. Disconnect the Battery
If all else failed, you need to consider disconnecting the battery. Doing this step will reset the electrical systems in your car. You should also be aware that your car will not start until you have correctly reinstalled the battery.
Disconnect the negative terminal from your car’s battery and the alarm should turn off immediately. You need to wait for a couple of minutes before you reconnect the battery. If this does not solve the problem, try doing this step again.
6. Maintain your Key Fob
Modern vehicles normally use a key fob to lock and unlock the car’s doors, as well as turn the alarm off. However, it will not work if the batteries are dead. If you notice that it takes a couple of tries to make it work, it is a sign that you need to have it replaced as soon as possible.
How to disable car alarm with/out removing anything
Now that we have discussed the various reasons why your alarm keeps going off, as well as the step-by-step instruction on how to turn off a car alarm, we are confident that you will now be able to do this job on your own. In most cases, you do not need a mechanic to do this job for you. All you need are the right materials and you can turn the loud sound of the alarm off like a pro.